On this date I added my first CSM project to Ravelry. At the time I only used the 54 slot cylinder on the machine even though it came with a 54 and a 72 slot cylinder. I did not know how to use the Ribber so as most do, I avoided it at the time.
I found if I made a toe-up sock, that even taking the sock off the machine and finishing with hand knitted cuffs, the cuffs themselves were almost too narrow to try to put the sock on. I was discouraged. At the time I was not aware of mock rib so at this point after attempting a few variations, I again put the machine into storage.
See My RAVELRY entry for my first PROJECT